ULTRA VIOLET GERMICIDAL IRRADIATION
MOLD REMOVAL SYSTEM FOR AHU COOLING COILS & DRAIN PANS
What are Germicidal Ultra Violet Rays?
UV Rays are Electromagnetic Light Rays wavelength shorter than visible light rays, typically 152 to 400 nM (nM is Nano Meter, or 10-9M).
UVA: Wavelength 315 to 400 nM. Marginal or no Bactericidal Properties.
UVB: Wavelength 280 to 315 nM. Limited Bactericidal Properties.
UVC: Wavelength 200 to 280 nM. At 253.7 nM has high Bactericidal, Germicidal and Virucide Properties. Adequate dose of UVC at 253.7 nM delivered for adequate time of exposure, destroys virtually all Bacteria & Virus.
Ultra Low Wavelength UV: Below 200 nM, produces uncontrolled and unregulated ozone in air. Should be prevented in occupied space, as level of ozone may exceed permissible levels.
What Is the Energy Intensity and Time of Exposure Required to Kill Bacteria?
Intensity of UVC Energy at 253.7 nM and adequate time of exposure of target bacteria are required to ensure destruction of bacteria to desired level. Both Energy Intensity and Time are essential. If one of these is inadequate, Kill Rate of bacteria cannot be assured. Kill Rate of bacteria is defined in unit µwsec/cm2. This is different for various bacteria, and is defined by Center for Disease Control (CDC) Atlanta, GA.
What is the designed Kill Rate for CoiloTron?
The greatest benefit of the GermiTron UVGI System is thas it is custom designed for client defined Kill Rate. See CoiloTron UVGI Selection Chart. No other system provides such flexibility. No other system guarantees deliverable energy intensity and Kill Rate in quantifiable units. Kill Rate in the CoiloTron System is designed on Energy Intensity at end of the lamp life. This guarantees that the designed Kill Rate is provided throughout the entire life of the lamp.
NuClimate is proud to exclusively represent Ruks Engineering products inside the United States. The Ruks CoiloTron is the perfect Ultra Violet Germicidal Irradiation (UVGI) System to assure mold free cooling coils and drain pans in air handling equipment. Eliminates mold, fungi, and microbes on cooling coils and in drain pans to keep these components clean and looking like new. Improves the heat transfer efficiency of the coil up to 20%. Near 100% elimination of Endotoxins and pathogens and reduces allergy symptoms, SBS and indoor related sickness.
|UL 1995 Listed and Fire & Smoke Test to UL 2043|
CoiloTron Installation Diagram
UNIQUE FEATURES & BENEFITS OF ODOTRON UVGI SYSTEM
High Energy Output 425 mA lamps emitting at 253.7 nM
Two lamps per fixture – Increased energy and spread
High reflective mirror surface 86 % specular reflectivity. Two fold increase in energy intensity
High uniform UVC dose on cooling coil
Penetrates deep down the rows for effective kill of bacteria
Highest lamp life in industry
Each lamp and holder protected with Quartz Sleeve equivalent to GE 214
Allows high transmission of UVC rays at 253.7 nM
Prevents moisture impregnation from cooling coil on lamp surface
Sustains uniform lamp temperature – Ensures optimum lamp performance
Protects lamp and holder from moisture damage. Protects from electrical damage, enhances lamp life
Contains and holds mercury spill in the event of lamp breakage
Prevents mercury spill into AHU and duct. Environmental safety
Quartz Sleeve design facilitates installation on discharge side of cooling coil. Ensures bacteria elimination prior to discharge to duct
Robust UL listed electronic ballast
Flexible installation and design allows easy movement of CoiloTron fixtures in horizontal and vertical axis. Easy to assure coverage of all areas of cooling coil and drain pan
Only one power input is required. Power input to all fixtures daisy looped
Suits cooling coil of any size
Telescopic vertical channels for supporting CoiloTron fixtures, top and bottom support caps; factory provided
Vertical support channels are telescopic. Adapts to any coil height
Telescopic vertical channels, top and bottom hats, screws and hardware, and all installation materials are factory provided. No field provided material required
Installation Cost is very low
Labor time to install – very low
Vastly increased heat transfer – Reduced Energy
Quick Return on Investment
Ballast individually UL listed
CoiloTron Listed to UL 1995
Tested and Certified by UL for Compliance to Fire and Smoke Safety to UL 2043
Patient Rooms & Other Patient Care Areas
Post Surgery Recovery Wards
Short & Long Term Care Facilities
Pharmaceutical & Capsul Filling Plants
Paediatric and Neonatal Wards
Food Processing & Food Packaging Plants
Residences with Immune Depressed & High Allergy Prone Occupants
*** Downloadable Brochure and Specifications are available in the Resources section of our website.