Ozone Generator Info
  • K-SERIES

  • DUCT MOUNTED OZONE GENERATORS

  •  

    CONTROLLED OZONE INJECTION SYSTEM 

  • K-SERIES OZONE GENERATORS - CONTROLLED OZONE INJECTION SYSTEM

    Reduces VOC

     

    Near total elimination of odor. Very effective in removing odor and smoke from cigarette, carpets, paint, cleaning solutions, cooking, human and body odor

    Sustains CO2 below 1000 PPM

    Operates with Outdoor Air down to 5 Cfm/P, yet in compliance with ASHRAE Demand Load Ventilation

    Decolonizes to near total elimination of mold, dust and particulate contaminants from AC ducts. Duct cleaning is not required

    If incorporated at design stage, can reduce Capital Expense of HVAC System

    Lowers Op Ex of HVAC System substantially by reduced consumption of electricity and water used by HVAC system

    Reduction in Operating Expense may result in ROI from 1 to 3 years, depending on hours of operation, import duties payable or not, occupancy, initial design Fresh Air Cfm/P, and cost of electricity and water

    If factored at early design stage, reduction in Capital Expense of AC system may equal total investment on IAQ System.

    System comes complete with Ozone Generator, IAQ Monitor, Auto DLC VOC Controller, Auto VOC Sensor Controller, Supervisory Ozone Monitor, and Duct Installation Kit.

 

    UL 1995 Listed and Fire & Smoke Test to UL 2043 

 

Ozone Generator, IAQ Monitor & VOC Controller - Air Flow Schematic Diagram

 

 

 

UNIQUE FEATURES & BENEFITS OF K-SERIES OZONE GENERATORS

Flagship product with projects over 20 years of continuous operation spread over many countries, with proven performance and energy and water reduction

Patented Plate Type Low Production Density Corona. Allows production of ozone at low concentration, and modulates quantity produced, within reason, without elevating concentration

All Stainless Steel construction to high quality and with stringent QA/QC protocols

Transformer used in the Generator is unique as it will not burn, cause fire, smoke, release toxic gas, elevate in temperature, even if the secondary is short circuited on full voltage and full load for extended period of time. Reverts to normal safe operation upon removal of short circuit.

An excellent safety feature

Any Duct mounted equipment is susceptible to moisture from carryover or condensation moisture. Transformer used in the K Series Generators will not fail or cause safety hazard even if fully immersed in water

An excellent safety feature

Transformer fully enclosed in 18 G diecast, single piece, dome end, carbon steel enclosure. Fully encapsulated

All high voltage cable is silicone insulated, UV and ozone resistant, rated to 20 KV and UL listed

All parts and components are individually UL listed

K Series Ozone Generators are UL Listed to UL 1995 ABQK: Air Conditioning Equipment Accessories, Air Duct Mounted

K Series Ozone Generators are tested and certified by UL for fire and smoke safety to UL 2043: Fire Test for Heat and Visible Smoke Release for Discreet Products and Accessories Installed in Air Handling Spaces

IAQ System is listed to UL 867A (acceptable IAQ Device for use in human occupied space)

Transformer used in K Series Ozone Generator is individually listed to UL 506: Standard for Safety and Specialty Transformer

Transformer used in K Series Ozone Generator is individually tested and certified by UL for fire and smoke safety to

UL 2043: Fire Test for Heat and Visible Smoke Release for Discreet Products and Accessories Installed in Air Handling Spaces

CE Certified

Operastes on 110 to 120 Volts, 60Hz or 220 to 240 Volts, 50/60Hz

Made in Canada, with parts and components sourced in Canada and USA

 

 

SUGGESTED APPLICATIONS

Hotel & Hospitality

Educational Institutions

IT & Corporate Facilities

Shopping Malls

Sports Complex & Stadiums

Air Ports

Locker Rooms

Bars 

 

*** Downloadable Brochure and Specifications are available in the Resources section of our website

Company News

Engineering Upgrade Announced

NuClimate Air Quality Systems, Inc is pleased to announce that it will be releasing new versions of its QLS (24" x 48") and Q1/Q1L (24" x 24") 1-way blow Chilled Beam unit during the 1st quarter of 2011.  This engineering upgrade will allow contractors to easily select left and right hand configurations to meet installtion demands.

Release of 2-Way Blow Induction Beam

NuClimate Air Quality Systems, Inc is pleased to announce that it will be releasing a 2-way blow Induction Beam unit during the 1st quarter of 2011. The unit will be available in two sizes 24" x 24" and 48" x 24". It will feature a fully functional drainpan in case latent conditioning is necessary. The unit will be available in 2 and 4 pipe configurations.

NuClimate announces Partnership with Carrier

June 1, 2012 NuClimate Air Quality Systems, Inc. is please to announce a new exclusive partnership with Carrier Air Conditioning for the OEM supply of its Chilled/Induction Beam line. Carrier's expertise and engineering tools will take this product to the next level! Stay tuned for more and check out our representative map for new representatives around the US and abroad.

Follow NuClimate on Facebook, Twitter & Linked-In

Follow NuClimate now on facebook and twitter and Linked-In!

http://twitter.com/NuClimate

http://www.facebook.com/NuClimateAirQualitySystems?ref=hl#!/NuClimateAirQualitySystems

http://www.linkedin.com/company/nuclimate-air-quality-systems-inc-?trk=nav_account_sub_nav_company_admin