Heating & Cooling

• Built-in hot water heating coil copper/aluminum

• 3-way modulating control valve (ball valve) with spring return actuator for "fail open" operation

• Coils sized for 60 degree temperature rise

• Removable through plug panel

• Indirect fired gas heat, stainless steel heat exchangers

• Optional built-in pump control with VFD (piped and wired)

• Optional steam coils

• Optional cooling coils, chilled water or DX

• Optional coatings available

Construction

• Aluminum double wall construction

• Single side access

• Hinged access doors with compression latches

• Weatherproof construction

• Structural base with lifting lugs

• Rigid encapsulated insulation 1.5/2" foil backed

• Aluminum panels welded and ground/polished

• Easily cleanable - wiring in liquid tight conduit

• Separate high and low voltage electrical boxes -  surface mounted

Heat Pipe

• Finned tubular design

• Aluminum fins - flat, continuous in
direction of airflow (not spiral)

• Multi-row design produces
latent heat recovery

• Permanently sealed - maintenance
limited to cleaning

• Easily cleanable

• Sits in sloped drain pan

• No moving parts to wear out or maintain

• Unique application and sizing provides maximum efficiency and capacity

• Sized for frost threshold at -30 degrees F

• Continues to operate at full capacity when frost threshold is reached

• 50 to 92% efficiency, based on mass flow ratios and room conditions

• Simple, reliable, and highly efficient

Dampers

• Aluminum construction

• High velocity air foil blades

• Opposed blade design

• Belimo spring return actuators

• Fresh air and recirculation dampers

• Heatpipe bypass dampers for summer operation

• 100% modulating control

Fans and Motors

• Direct drive

• Industrial aluminum plenum fan wheels

• Structural bases with internal isolation

• Controlled by variable frequency drives

• Sized to provide design airflow
at 80% of capacity

• No belts, bearings, or pulleys -
limited maintenance

• Premium efficiency motors

• Owner can easily adjust the room
circulation rate and room pressure

• These fans are designed for
a pool environment

Filters

• Seperate filter banks for fresh and return air

• High capacity pleated air filters

• Available from Merv 7 to 13

Controls

• Built-in DDC control system

• Will factory install controls
furnished by others

• System wired and tested prior to shipment

• Unit mounted temp/humidity sensors

• Remote unit shutdown

• Remote mounted temp/humidity/pressure sensors

• Remote/unit mounted monitoring
and control panel

• Optional WEB control for trend logging and energy saving rebate verification

Electrical

• Single point power connection

• Unit mounted locking disconnect switch

• Individual circuit breakers for each component